|
 |
 |
 |
|
| Before commencing. There is 18 mm between prop & cutless bearing. | The prop shaft withdrawn to allow the stuffing box & gaiter to be withdrawn | The new gaiter and the repacked stuffing box | Full view of same. before fitting of rope cutter. |
Click on the thumbnail to see the full-size image. Full size image files are 90-250K bytes.
|
|
|
|
|
| Before commencing. There is 18 mm between prop & cutless bearing. | The prop shaft withdrawn to allow the stuffing box & gaiter to be withdrawn | The new gaiter and the repacked stuffing box | Full view of same. before fitting of rope cutter. |
|
 |
 |
 |
|
| Gearbox coupling with 20mm spacer interposed. Note there is now no space for worm clip on prop shaft. | Stripper cutter fitted. Approx 10 mm between unit & cutless bearing. | Alternative view | Alternative view |
|
 |
 |
||
| Cockpit dodger from Jeckells | Bilge keels after removal of old finish and application of Kurust | The 6th coat of Primocon! |
|
||||
| Photo rotated. Sink to left. Tap-toe pump seen top right |
Last updated: 16 July 2006
